Blog

A step-by-step guide of how to use the Setup Menu to configure your DM-2 to display only the required information.

Part 1 of our FanTestic Training series. This covers installing and using the software for a single point test. It's as easy as inputting your data. The software will automatically calculate all the numbers you need.

How to run an automatic blower door test using FanTestic software.

Part 2 of Retrotec's Level 2 Energy Training introduces the pressure gauge, and some of the common problems that can occur.

Learn how to check your gauge's calibration. This can be done quickly and easily in the field.

A demonstration of the smoke puff of a Retrotec Air Current tester.

This five part series looks what an air leakage test of a typical house might look at. In this part, we discuss how to setup for a house test. It's important to properly prepare before testing, so that we know the results are accurate.

Part 7 of our FanTestic series covers how to adjust the settings to prepare for an auto-test.

A brief walkthrough of how to use the Setup Menu to configure the Devices available on the DM-2.