High Powered Blower Door System
All the features of a Model 5100 but double the power.
This system will test a wide range of enclosures, from super leaky to super tight. This high output fan includes 6 standard + 3 optional low flow ranges to provide accurate results over the widest range of enclosure volumes. It also includes the newly released DM32X gauge. All Retrotec fans are made with extremely durable space-age hard plastic, which makes them both lightweight and tough.
Who uses it?
- Energy Auditors, HVAC Contractors, Building Contractors & Remodelers, Home Inspectors
Why Buy This Model?
- The added power increases the range of test pressures that can be created without changing ranges mid test.
- The stability of control reduces the fan’s response to wind and holds the test pressure more constant, making tests faster and more accurate.
- New guide fins over the flow sensors decrease sensitivity to wind by 75%.
- System accessory and fan cases are included.
1 x DM32X Gauge Package
- DM32X Gauge (Newly Released! click here for details)
- USB-C Charging Cable
- Cat5 Cable
- Gauge Case
- DM32X Magnetic Clip
- ISO17025 calibration of DM32X
- Gauge Calibration Verification Report
1 x 6000 Series Fan Set
- Each fan set contains:
- 6000 Series Calibrated Fan
- High Power Drive for 6000 Series Fan (120V/60Hz, 240V/50Hz, or 110V/50Hz)
- Range Ring A for 5000/6000 Series Fan
- B8 Plate for 5000/6000 Series Fan
- 8 x 4" Blank Plugs
- 2 x Fan Cover
- System Calibration Verification Report
1 x SmartCloth Door Panel & Frame (new) - Single Fan
- Aluminum Frame, Red Anodized
- SmartCloth for 1000/2000/3000/5000/6000 Series Fan, Regular Height
- Fan Crossbar Strap for Aluminum Frame
- Case for Aluminum Frame
- 1 x Case for System Accessories
- **Optional: 50" Large Aluminum Frame Offered At Additional Cost**
1 x Case for System Accessories
1 x Fan Case
1 x Blower Door Tubing Kit
1 x Umbilical for 1000/5000/6000 Series Fan, 7 ft (2 m)
Model 6000 Fan |
||||
|
Flow Into: |
CFM |
Litres/sec |
M3/h |
Max Flow, per fan (60 Hz) |
Free Air |
8,100 |
3,823 |
13,762 |
50 Pa |
7,700 |
3,634 |
13,082 |
|
75 Pa |
7,400 |
3,492 |
12,573 |
|
Minimum Flow: |
|
|
|
|
on Included Range B1 |
50 Pa |
95 |
49 |
161 |
on Optional Range 74 |
50 Pa |
37 |
17 |
63 |
on Optional Range 47 |
50 Pa |
21 |
10 |
35 |
on Optional Range 29 |
50 Pa |
9 |
4 |
15 |
Dimensions: |
22" (55.9 cm) inlet diameter, 9.75" (24.8 cm) long, 25" (63.5 cm) height |
|||
Weight: |
33.5 lb (15.2 kg) or 35.2 lb (16.0 kg) with Ring A & Plated B8 installed |
|||
Flow Accuracy: |
+/-5% |
|||
Power: |
120V@60hz/22.0A or 240V@50hz/10.9A or 110V@50Hz/22.0A |
|||
Recommended Fan Calibration Interval: |
5 years |
Digital Gauge Model: |
DM32X |
Gauge Specs: |
Door Panel and Frame Model: |
AL250 |
Type of Panel: |
SmartCloth Panel & Frame – Single 1000/3000/5000/6000 Fan |
Type of Frame: |
Regular Sized Red Anodized Frame |
Collapsed: |
27 1/8” X 53 3/8” (68.9cm X 135.6cm) |
Expanded: |
43 5/8” X 97 ½” (110.8cm X 247.6cm) |
Frame Thickness: |
1.75” (5.3 cm) |
Weight: |
16 lbs (7.3 kg) |
* The max flow of the fan will vary depending on the following factors: Voltage, frequency, barometric pressure, back pressure, blade pitch, air temperature, bearing tightness, inlet air turbulence
* 5000/6000 series blower doors DO NOT work with the DM-2 digital gauge