Jack Duffy
-
September 02, 2016
Recently, Retrotec was happy to have a visit from Chuckanut Builders, who toured our factory and learned a little about Retrotec's operations. Read Chuckanut Builder's article below, or view the original on their website here. Thank you Chuckanut Builders for stopping by!
The following aricle was written by: Jenny Rae of Chuckanut Builders. View the original article here.
"We recently learned that Retrotec, a blower door and duct testing manufacturing company, is located in Everson, Washington. We had no idea! As a building performance contractor committed to buying local whenever possible we were shocked we’d never met the folks at Retrotec
-
-
-
-
June 23, 2016
- Ventilation Strategies
- Whole House Mechanical Ventilation
- Methods for Testing
- Common faults
- Proper Duct Installation and Termination
-
May 25, 2016
-Test for Energy Code Compliance or Envelope Performance
-Setup your gauge for code compliance
-Best practices for blower door tests
-Overcome common testing issues
-Where are the most common envelope failure locations?
-
May 17, 2016
-Blower door best testing methods
-Finding Leakage with blower door test and IR cameras
-Requirements for IR evaluations with a blower door
-Baseline measurements options
-Identifying air leakage vs. thermal differences
-WiFi testing with blower door and IR cameras
-
May 06, 2016
-Duct Testing - Total leakage
-Duct Testing - Leakage to outdoors
-Other Tests with blower door
