Sales: 1 (855) 738-7683
Adding the Hard Panels decreases set up time and makes the test easier to run. Yes, it’s the most expensive but those using this system report that it has paid off quickly.
Request literature on all of Retrotec systems to determine the size of enclosures that can be tested with each system.
Test for hold times in flooded volumes up to 102,000 cu ft (2000 m3) for Inert agents and 140,000 cu ft (4000 m3) for halocarbon chemical agents.
Testing pressure relief vents will require more power however. This system will test the venting for a volume up to a maximum of 24,000 cu ft (660 m3) for Inert agents although vents up to 16 sq ft (1.6 m2) can be measured individually.
All Retrotec systems include tech support from Retrotec who originated the idea of Enclosure Integrity testing in 1984. They promoted it within NFPA and in 1986 wrote the first Enclosure Integrity standard. Retrotec has been the lead researcher for enclosure testing ever since. Every major clean agent system manufacturer worldwide relies on Retrotec’s expertise for both hold time and peak pressure predictions.
5000/6000 series blower doors DO NOT work with the DM-2 digital gauge.
Match the colored tubes to the ports even when pressurizing where you normally need to run an extra tube but not with Retrotec where the gauge figures it all out. You’re always hooked up correctly, nothing to remember; you cannot make a mistake.
High-capacity batteries last 8 hours. Recharge them anywhere - even in your car or from your laptop. Save hundreds of dollars a year over throwing away batteries!
DM32 smart gauge will display results in any units – no calculations needed!
Losing tools, disorganization, and protecting your electronics from corrosive smoke are no longer a problem with this custom case. Stiff lid acts as a gauge stand and the rubberized base protects from water and mud. Just open, grab what you need and get testing.
Won’t crush and pops back into shape when dropped.
Graphics of ranges and fans are quickly recognizable, while the results are large and easy to see, eliminating error. Your settings all come back when you restart your gauge.
This fan’s custom wave shaping circuit transforms more power into flow resulting in less heat.
9 different ranges allow you to choose the perfect setting for any test. Avoid changing ranges mid-test or having to pay extra for the ranges you’ll need.
We built the world’s first automated backpressure compensated flow chamber to improve accuracy under all conditions.
Great software for controlling your gauge remotely from a computer or a smartphone, performing auto and semi-auto tests, updating gauge software, and more – all included.
Enclosure Integrity testing software for calculating and reporting Hold times, Peak Pressures, and Venting requirements of enclosures with clean agent fire suppression systems.
In compliance with standards: NFPA 2001, ISO 14520, EN 15004
All the software you will need to use your computer with the DM32.
Software to configure parameters on the DM32 family of digital manometers, provided as part of the DM32 Software Suite. The DM32 Configurator software updates parameters on gauges including Network settings, and is used to update the onboard software on the gauge (firmware) when the manufacturer releases new features.
Software to record two channels of pressure readings to a spreadsheet file in real time, for use with the DM32 or DM-2 digital gauge.
Software to remotely control and reflect the state of a real gauge connected to a computer, or to generate a simulated gauge on the computer which mimics the operation of a DM32 family gauge.
Control the WiFi model of Retrotec's DM32 digital pressure gauge wirelessly with the GaugeRemote app on Android!
Control the WiFi model of Retrotec's DM32 digital pressure gauge wirelessly with the GaugeRemote app on Apple devices!
Maximum Flow*, per fan
-on optional Range B29
26" × 25.5" × 9.5" (66 x 65 x 24 cm)
36.3 lb (16.5 kg) or 38 lb (17.2 kg) with Ring A & Plated B8 installed
120V@60hz/22.0A or 240V@50hz/10.9A or 110V@50Hz/22.0A
Recommended Fan Calibration Interval:
Digital Gauge Model:
Link to Specifications:
Click here to see the full specs for the DM32
Door Panel and
Type of Panel:
Hard Panel (Single Fan) for 5000/6000 fan
30” – 50” (76.2 - 127 cm)
76.5” - 87” (195 - 221 cm)
Panel Case (included):
31” x 30” x 7” (79 x 76 x 18 cm)
AL261 with AL260R
Large Sized Cloth Panel for Single Fan
32” - 50” (81 - 127 cm)
60” - 109” (152 - 278 cm)
1.75” (5.3 cm)
25 lbs (11.4 kg)
* The max flow of the fan will vary depending on the following factors: voltage, frequency, barometric pressure, back pressure, blade pitch, air temperature, bearing tightness, inlet air turbulence