Download the Latest Version of GaugeRemote

*You can view the version of the Retrotec software you are using by starting the application and looking at the top left corner on the title bar*

SoftwareReleaseDateFeatures
GaugeRemote 1.3.0 2015-07-29
  • Control fan with DM32 screen while GaugeRemote is connected - DM32 screen will not be "locked" anymore, allowing two-way communication 
  • Algorithm improvements for WiFi disconnections & reconnections  
  • Support for new DM32 firmware version 2.3.62 functions 
  • New Blower Doors: “5000” and “6000” Devices and Ranges added   
  • New DucTester: “4000” Device and Ranges added  
  • "102" Range added for 300, 340, 450 Devices  
  • "1000/2000” Device is now displayed as one Device instead of two   
  • Notification for latest DM32 firmware available for download
  • Logic to handle mobile data connection interferences with WiFi network settings on some devices 
  • Improvements to handle packet losses causing premature disconnections 
  • Bug fixes 
GaugeRemote 1.2.0 2014-10-28
  • New devices added: 240, 300, 340, 350, 450 (with new Range Configurations) 
  • 6 new languages including German, French, Spanish, Norwegian*, Russian, Polish* (*languages not offered in DM32) 
  • Framework for separate Blower Door and DucTester calibration coefficients, for more precise flow calculations according to fan application 
  • Faster refresh rate of measurements and results  
  • Set Speed increment & decrement adjustments improved to +/-1%, instead of +/-5% 
  • Automatic n-valve setting for more precise "@ Pressure" flow extrapolations; 0.65 for Blower Door testing; 0.60 for Duct Testing; 0.5 for Hole Flow, TrueFlow and Exhaust devices  
  • Wake lock (Android only) for improved user experience  
  • Support for international numerical syntaxes 
  • Flow/Area metric units changes to more popular European formatting 
  • New button to disconnect app and stop fan [new to Android only, was available on iOS v1.0 circa 2013-12]   
  • Improved WiFi reconnection algorithm
GaugeRemote 1.0.10 2013-12-18
  • Improved WiFi reconnection logic
    • Automatically re-establish wireless network connection if WiFi is still found  
    • Timeout period for reconnection, during intermittent WiFi signal loss  
    • Error message to reconnect via WiFi Settings when WiFi is completely lost (out of range)  
    • Reinitialize Find Gauges to populate gauge IPs at Connection Screen  
  • New function to disconnect app, and stop fan (if Set Pressure or Set Speed modes are currently implemented)  
  • Home screen UI additions:  
    • Volume or Area values set - for permeability & ACH results, while using Set Pressure mode  
    • DM32 build number and calibration date - at app startup  
  • Bug fixes