Monthly Archives: August 2013
-
Posted: August 15, 2013Categories: Gauge Training Basics
Learn how to check your gauge's calibration. This can be done quickly and easily in the field.
-
Posted: August 15, 2013Categories: Blower Door Operation with a DM32 Gauge
Part 2 of Retrotec's Level 2 Energy Training introduces the pressure gauge, and some of the common problems that can occur.
-
Posted: August 15, 2013Categories: FanTestic Software
How to run an automatic blower door test using FanTestic software.
-
Posted: August 15, 2013Categories: FanTestic Software
Part 1 of our FanTestic Training series. This covers installing and using the software for a single point test. It's as easy as inputting your data. The software will automatically calculate all the numbers you need.
-
Posted: August 15, 2013Categories: Gauge Training Basics
A step-by-step guide of how to use the Setup Menu to configure your DM-2 to display only the required information.
-
Posted: August 15, 2013Categories: FanTestic Software
Part 6 Is a brief video that explains the importance of setting up correctly for an auto-test.
-
Posted: August 15, 2013Categories: Gauge Training Basics
Surprise yourself with the huge resulting errors from setting the wrong device or wrong range on your digital gauge.
-
Posted: August 15, 2013Categories: Gauge Training Basics
Why your flow may read "too low" on your gauge and what to do about it
-
Posted: August 15, 2013Categories: Duct Testing for Residential
-
Posted: August 15, 2013Categories: Duct Testing for Residential