Monthly Archives: August 2013
-
Posted: August 15, 2013Categories: FanTestic Software
Part 10 of our FanTestic video series explains the simple process behind saving a opening your tests. With FanTestic, you can save and revisit previous tests at any time.
-
Posted: August 15, 2013
-
Posted: August 15, 2013Categories: Duct Testing for Residential
This five part series looks what an air leakage test of a typical house might look at. In this part, we take a look at a duct leakage to outdoors test. In some cases, this is more important than a total duct leakage test, as this test narrows down the duct leakage to only the energy lost to the outdoors.
-
Posted: August 15, 2013Categories: Blower Door Operation with a DM32 Gauge
Part 3 of Retrotec's Level 2 Energy Training covers some of the different types of tests that can be done with a door fan/blower door system.
-
Posted: August 15, 2013
How to run a semi-automatic blower door test using FanTestic software. This allows for the ease of an auto test along with manual input options for the user.
-
Posted: August 15, 2013Categories: Blower Door Operation with a DM-2 Gauge
A brief walkthrough of how to use the Setup Menu to configure the Devices available on the DM-2.
-
Posted: August 15, 2013Categories: FanTestic Software
Part 7 of our FanTestic series covers how to adjust the settings to prepare for an auto-test.
-
Posted: August 15, 2013
This five part series looks what an air leakage test of a typical house might look at. In this part, we discuss how to setup for a house test. It's important to properly prepare before testing, so that we know the results are accurate.
-
Posted: August 15, 2013Categories: FanTestic Software
-
Posted: August 15, 2013
A demonstration of the smoke puff of a Retrotec Air Current tester.